M5 & M3 Brass Threaded Inserts
DIY PARTS FOR MAKERS & INVENTORS
Cart 0

Makerparts.ca

M5 & M3 Brass Threaded Inserts

$0.50
We have 48 in Stock


M5 Brass Screw-to-Expand Inserts for Plastics
M5 x 0.8 mm Thread Size, 0.99 mm Thick Flange

Made from brass, these inserts are nonmagnetic, corrosion resistant, and electrically conductive. The flange provides a load bearing surface for use in weak plastics. Press or hammer the insert into a drilled hole, then install a screw to expand the insert and drive the knurls into the surrounding plastic to keep it secure. Installed length includes the flange.

Suggested Bit Size/ Hole Size 6.4mm

---------------------------------------------

M5 Heat-Set Inserts for Plastics
M5 x 0.8 mm Thread Size, 6.75 mm Installed Length

Plastic softens when heated during installation, then cools to solidify around the insert's knurls and ridges to resist torque and pull-out. These are also known as Ultrasert inserts. Create a hole with a drill bit and taper the hole to the larger hole diameter using a reamer, then install the insert using a soldering iron with an installation tip (sold separately). Inserts are made from brass, which is nonmagnetic, corrosion resistant, and electrically conductive.

Suggested Hole Diameter is 7.7mm
Recommend it is installed with proper Installation Tip for Soldering Iron (Sold separately)

Actual insert dimensions 8.34mm diam x 6.74mm h

---------------------------------------------

M3 Heat-Set Inserts for Plastics
M3 x 0.5 mm Thread Size, 3.8 mm Installed Length

Plastic softens when heated during installation, then cools to solidify around the insert's knurls and ridges to resist torque and pull-out. These are also known as Ultrasert inserts. Create a hole with a drill bit and taper the hole to the larger hole diameter using a reamer, then install the insert using a soldering iron with an installation tip (sold separately). Inserts are made from brass, which is nonmagnetic, corrosion resistant, and electrically conductive.

Suggested Hole Diameter is 5.1mm
Recommend it is installed with proper Installation Tip for Soldering Iron (Sold separately)

 


Share this Product


More from this collection

//