Prices are in Canadian Dollars ‎‎‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎ ‏‏‎ ‎‏‏‎ ‎‎‏‏‎‏‏‎ ‎ ‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ Average Order Processing Time: 1 Week
Cart 0

LEAD 1515 High Z Add-On

This item is not currently in Stock, but is available for pre-order - typically a one week delay for pre-ordered items.

Because of the modular nature of the OpenBuilds system you can raise the Z height of your LEAD 1515 using the same process of adding taller sides as the High Z Mod.
In the case of the LEAD 1515 its now even easier because everything for the rigidity is already in place! All that is needed are the 2 taller 20x80 (500mm) side columns to raise the height.

So how it works is you would still follow along with the standard LEAD 1515 Build video as normal, but where the smaller (330mm) side columns are being used you would use the taller (500mm) ones in its place and where the shorter (250mm) Z axis is being used you would use the longer C-Beam (500mm) and longer Lead screw (540mm)

So for the higher Z mod you would need
(2) 20x80 V-Slot @ 500mm - To replace the 330mm side columns
(1) C-Beam @ 500mm - Will replace the shorter C-Beam for the Z axis
(1) Lead screw @ 540mm - For the new Z axis longer length

The build is the same as the Build video.

We have included a couple pictures (pictures only show taller sides, not the taller Z axis) as well as a SketchUp 3D model in the Files and Drawings Tab

Share this Product